7 ways to make sure your work is printed Ready

The following article provides a quick guide on what to think about when preparing your artwork for printing.
It is important to follow these instructions for any errors that may cause the delay or unncessary a source of stress must be the final print quality below standard.

1. Check the files
Check your artwork for spelling and grammar, ensure all images used are high precision. Check to make sure you find errors delay the transition of your product.

2. Bleeding
Purge little extra page that you are on the design concept, as usual, with the knowledge that will be made final truncated Bulletin. If pictures of your works to serve the page, and the body must be far from the edge of the plate a few mm good. We use the bleed area and 2mm on each side.

3. Text
Keep away Bulletin board basic text about 10MM-8 for best results.

4. Print Resolution
Make sure that the decision out at least 300DPI. Resolution the better.

5. File Formats
If you use the Joint United Nations downloading, make sure to provide your artwork in JPEG or TIFF flattened. This ensures that there will be no problems when the line is checked your artwork. Program formats are the most widely accepted common Quark, Illustrator, Photoshop, Corel Draw, Corel Paint, a free software, InDesign and Paint Shop Pro. Vector files, such as. EPS and PDF are becoming more frequent and ensuring better end product.

6. Colors
However, if you have calibrated your work is likely to be a slightly different color when printing. Ensure correct color choice before being sent to print.

7. Imminent final
Before it is sent to the printer, and a more definitive choice, which should in all.

Warning
There are two things that should be taken into consideration when designing your flyers:

Because of the quick turn around of our newsletters, which are slaughtered shortly after printing, in most cases, we try to give a printed paper 8 hours to dry completely, and it is not always the case. This is noticeable when they go from one side of the white leaflet, and bleeding secondary to other rich colors vanguard. It will light ink powder more than the rich, and white. In this case, we recommend the use of the border.

Border on the Bulletin board Bulletin may sometimes give classic look. But make sure that the border is a good few mm from the edge of the plate, due to the way print documents (up to 32 at a time) and the speed at which we turn round (payment to your door), these limitations may not finish a few minutes to 10 minutes wigs. This is why we ask bleeding and 2mm. Cutter can go either way. We can not accept responsibility for results is complete and if it is a little irregular borders.